|
|
Here is the second part of the Road Torment Update. When I first tried the box in the last weeks update I really didn't feel it pushed me to just sit in there. So I challenged the guys here to push my limits a little harder. I guess I should have remembered to be careful of what you wish for.
The new packing material added makes it difficult to even breathe. It is going to be crazy when we get this thing on the road.
|
|
|
|
|
|
|
|
|
You know how sometimes they put the box on the side of the road to count cars when they are deciding to pave a road or want to know the demographics of an area. Well I thought what if a girl had to do the counting. and feel every car that drove across. This box will be equipped with a Pressure switch to detect the cars and contact a circuit that counts as well as shocks the girl inside the box.
This first part involves the box as well as some basic measurements needed to build it. Then I wanted to see if it was so strong that I could never break out.
|
|
|
|
|
|
|
|
|
I thought you guys would like to see something a little different. I have done some suspension in the past but only with other studios. I never did a suspension here because of the limited space and what not. With the move in date on the new house just around the corner we are staying with some friends who were more than happy to lend us this great space to do the update.
|
|
|
|
|
|
|
|
|
I will be forced to stand on a very small stand which really forces you to concentrate on not falling off of it even thought it is really only a few inches off of the ground. It symbolizes much much more in the mind when you are going to be shocked for moving and are already sweating from the heat of the latex.
This device uses mercury switches to detect any movement and a tens unit to deliver the unwanted reward for moving
|
|
|
|
|
|
|
|
|
After the Skye lamp update it seemed she had so much fun I was kind of jealous so I really wanted to try it. I must say it didn't take much convincing around here. All I did was mention the thought and out came the stand and the shrink wrap. I was already dressed for the occasion and just needed to grab my glove and hood from the closet
|
|
|
|
|
|
|
|
|
This one was actually pretty tough. I kind of made a bet with the guys here that I could make it a whole day tied in the cage and it would be easy for me. So out came the ropes and the trusty old cage. Next thing I knew I was tied very tightly into the cage. My elbows were pulled down by the ropes and my arms were pretty much welded to the bars. My upper body was attached to the back of the cage.
So it was pretty easy for the first 2 or 3 hours. After that it got painful. Imaging just sitting strapped to the bars immobilized for an entire day
|
|
|
|
|
|
|
|
|
I wanted to have a place for parties and just to kick back with friends. So what better way to accomplish this than build a new martini bar. After looking in the stores out there I didn't find a table that I liked. We decided the only way to get one that fit our needs we would have to build our own.
|
|
|
|
|
|
|
|
|
This hood is really almost too small. It is so tight and really hard for me to breathe. I had to concentrate on the breathing to get enough air. Also I never expected that the gas mask would follow. I really didn't know that I would get to find out just how long I could hold my breath.
|
|
|
|
|
|
|
|
|
This is a set from the last time Vanessa came out to visit us from California. Vanessa was fairly new to the kink world and at the time she had only begun to experiment with bondage and during her visit she had asked Michael to tie her up. Of course since that is what we do here she didn't have to ask him twice. By the end of her visit she found that not only is it fun to be tied but it is also very rewarding to be a little more dominate.
|
|
|
|
|
|
|
|
|
I was surprised at first by the way two simple sticks bound together could be so restrictive. To start I basically went to the hardware store and purchased some closet rods. Once wrapped to them with the pallet wrap and then further secured with additional wrap over the top it was impossible to move a muscle.
|
|
|
|
|
|
|
|
|
I was on vacation and the hotel room had a tall lamp like this and I am not sure what started the process but in my dream I was attached to the lamp for the night. I told the guys about the dream and they decided to do something about it. With a little modification. X-10 Controlled Dimmer and Radio Frequency Remote. I had the perfect bedside light.
|
|
|
|
|
|
|
